Features and advantages
The device is operating in USB Full Speed mode (up to 12 Mbit/s), it can be implemented in field of power electronics, since the device is operating stabily with emission of interference, which is caused by commutation of power switches.
A USB-cable with ferrite filter is recommended to be used provided there is a high level interference emission.
The following lines of TI microcontrollers are supported:
С2000 (Piccolo, Delfino, ARM Cortex-M3, F28M3*, C28**)
С5000 (С55**)
С6000 (С64**, C67**)
Davinci Video Processors
ARM Cortex-A8 Sitara
The emulator is connected to the microcontroller board by means of flat cable with 2x7 Pin connector. Pitch of the connector: 2.54mm. Length of the flat cable 65mm.
Delivery set:
Emulator EmuOK;
Cable USB - miniUSB